Product ID:SAVIN PRISM I DRY CYAN INK/TONER, 8225
MSDS Date:07/19/1989
FSC:6850
NIIN:00N017216
MSDS Number: BLCDM

Emergency Phone: 301-921-8503

Info Phone: 301-921-8503

Cage: 29382

Telephone: 203-967-5000

Cage: 29382

POLYESTER RESIN

STYRENE-ACRYLIC RESIN

ORGANIC PIGMENT

POLYPROPLYLENE WAX

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: NON IRRITANT, NOT
SENSITIZED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:MINIMAL IRRITATION TO RESPIRATORY TRACT MAY
OCCUR AS WITH EXPOSURE TO LARGE AMOUNT OF ANY NON-TOXIC POWDER.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
RESPIRATORY SYSTEM.

First Aid:INHAL: REMOVE TO FRESH AIR, CONSULT MD IF SYMPTOMS PERSISTS.
EYES: IN CASE OF CONTACT, IMMED FLUSH EYES WITH COPIOUS QUANTITIES
OF WATER FOR AT LEAST 15 MIN. INGEST: CALL MD IMMEDIATELY .

Lower Limits:24.6 G/M3
Extinguishing Media:WATER SPRAY, FOAM CO*2, DRY POWDER.
Fire Fighting Procedures:THIS MATL WILL BURN IN CASE OF FIRE.DECOMP
PRODS ARE CO, CO*2, & NO*X. AVOID INHAL OF SMOKE. WEAR NIOSH/MSHA
APPRVD SCBA & FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SWEEP UP OR CLEAN WITH A VACUUM CLEANER (USE
GROUNDED VACUUM CLEANER).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL HANDLING REQUIREMENTS
NEEDED FOR SAFETY REASONS. AVOID INHALATION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:UNDER NORMAL INTENDED USE NO SPECIAL PROTECTION
IS REQUIRED.AVOID INHALATION. USE NIOSH/MSHA APPROVED RESP FOR
EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:UNDER NORMAL INTENDED USE, NO SPECIAL
EQUIPMENT/CLOTHING REQUIRED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:FINE ODORLESS POWDER (CYAN COLOR)

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND BASES.
Stability Condition to Avoid:HIGH TEMPS
Hazardous Decomposition Products:PHENOL DERIVATIVES, CARBON MONOXIDE,
CO*2, & NO*X WHEN HEATED AT HIGH TEMPS. (>300C)

Waste Disposal Methods:LANDFILL OR INCINERATE IN COMPLIANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.